Add 50 percent of the sand to the water, all of the pigment and all of the portland cement. Mix thoroughly with the paddle, and then add the remaining water and sand. Continue mixing until your stucco is a smooth, spreadable consistency. Mix five minutes more, and then apply the mixed stucco to your surface. Larry Simmons is a freelance writer and expert in the fusion of computer technology and business. He has a B. He's published several hundred articles with Demand Studios. By Larry Simmons Updated September 26, Ask The Builder: Applying Stucco.
Article Summary. Method 1. Remove paintings, rugs and anything that isn't too heavy to carry from the area around the place you plan to stucco.
Remove furniture if you are going to stucco a ceiling. Cover everything with drop cloths and secure them with painter's tape or masking tape. Wash the surface with a mixture of household detergent and warm water.
Rinse thoroughly with warm water and allow the surfaces to dry completely. Clean it thoroughly to help the adhesive cement stick better to your wall.
Protect faceplates, fixtures, window sills and other paneling with painter's tape. Take your time to ensure that your tape is straight and it will create a more professional look. Fill gouges, holes and cracks with spackling compound. You can apply the compound, which is available in hardware stores, using a putty knife or a paint scraper. Method 2. Choose stucco or textured paint from a hardware or paint store. If you hope to cover up a lot of blemishes with the stucco finish, then you will need to buy a larger quantity of thick stucco paint.
For a thick stucco coat, it will only cover approximately 25 square feet 2. Ask the paint associate what they recommend for your particular job specifications. They may be able to recommend the best options for your stucco needs and help to supply you with the tools needed to complete the job, since stucco requires more tools than traditional painting. When purchasing stucco paint for outdoor surfaces, you can choose fine, medium or coarse sand stucco.
Consult the paint specialists about which option would be best for your building. If you want, mix the stucco yourself. Stucco is usually made out of Portland cement, sand, hydrated lime, and water. This will make it easier to color the newly-patched stucco and blend it in to the existing stucco, although you want still need to color the whole wall later on if the colors don't match seamlessly. If you're doing a small job and only need to patch up stucco, consider getting pre-mixed stucco patch.
Pre-mix stucco patch can come in either textured or un-textured form, and comes ready to go, for ease of application. If you're only patching up a slight area and don't want to spend a lot of time mixing, this might be the right way to go. Method 3. Spread some stucco on a sheet of plywood to experiment with the kind of texture you would like to create.
The following are common kinds of stucco finishes, each of you may want to try before deciding: Use only a roller to create a stippled effect.
This is not the best option if you need to cover uneven or blemished walls. Use a trowel to spread on the stucco paint in a thick, uneven pattern.
This is commonly used for outside walls. This is the best option if you are trying to cover up a heavily marred surface. You can dip the sponge in the paint and apply it directly to a surface, then repeat in a geometrical or random pattern.
Use a stiff brush or a comb to create "draw" onto the stucco or textured paint once it has been applied. You can draw waves, stripes, cross hatches or circles. Prep your wall to receive the stucco. Give your stucco the best chance to adhere to your wall by prepping your surface first. Of course, how you prep your surface depends on what kind of wall you have: For concrete, brick, or block walls: Apply a coat of concrete bonding agent onto the wall.
Allow it to dry completely before moving on to the next step. For wood walls: Nail roofing felt over the wall, also called "building wraps" or "stucco wraps. Nail the netting to the felt using galvanized roofing nails. Apply the scratch coat of stucco using a trowel and a hawk, if necessary. The scratch coat is the first layer of stucco, usually applied to a wire mesh lath, which is then scraped.
The slower stucco dries, the stronger it becomes. In sunny and hot locations, stucco must be shaded to prevent the dehydration of the stucco mix. Never apply stucco if the weather temperature is lower than 40 F. There are many major manufacturers that you can contact for more information on mixing and applying stucco:. Stucco can be mix with pigment to create a range of colors, or it can be used without pigment and simply bear the natural gray of its cement. Some contractors tend to use warm colors, such as yellow, pink, or orange, but beige and white are perhaps the most common colors used for stucco.
Stucco can be painted, but it must cure for at least six weeks prior to painting. Coloring stucco with pigment is far preferable to painting it because paint creates a regular maintenance issue, while pre-mixed coloring is permanent. Actively scan device characteristics for identification.
Use precise geolocation data. Select personalised content. Create a personalised content profile. Measure ad performance. Select basic ads. Create a personalised ads profile. Select personalised ads. Apply market research to generate audience insights.
0コメント